ABRASIVE AND POLISHING KIT DIAM 150 MM (8150-KA + 8150-KP)

Contains 1 abrasive kit (8150-KA) and 1 polishing kit (8150-KP) Ø 150 mm.

 

8150-KA:

This abrasive kit with 150 mm WA discs, contains the necessary tools to sand hard metals and stainless steel and thus prepare them for polishing. After all, it is only possible to polish on pure metal. This is also the most important phase in the polishing of strongly scratched iron. These 150 mm diameter WA discs are mounted on a drive unit with a minimum power of 0.5 HP (0.37 KW). This kit is much more economical than the total cost of all parts individually.

- 2 WA-wheels diam. 150 mm

- 1 Container of abrasive compound grain 120

- 1 Container of abrasive compound grain 180

- 1 Container of special glue for abrasive compound

- Manual

 

8150-KP:

This polishing kit, contains the necessary to polish all kinds of metals. Polishing discs with a diameter of 150 mm are mounted on a drive unit with a minimum power of 0.5 HP (0.37 KW) and a recommended rotation speed of 3000 rpm. This kit is much more economical than the total cost of all parts individually.

- 1 Close stitched sisal polishing wheel diam. 150 mm (W1)

- 1 Close stitched cotton polishing wheel diam. 150 mm (W2)

- 1 Loose stitched cotton polishing wheel diam. 150 mm (W3)

- 1 Compound P1 (grey)

- 1 Compound P2 (brown)

- 1 Compound P3 (blue)

- Manual