MECH-MATE MOTORPIT SP241 WITH EXTRA RESIN COAT AND DEPTH- 2.4 x 1 x 1.4 M
Brand : MECH-MATE
Art.:
MM-SP241-G-ED
€3,300.00
Depending on the delivery address, VAT may vary at checkout. More info
This item is only deliverable on order and will be available in 30 days.
MECH-MATE MOTORPIT SP241 WITH EXTRA RESIN COAT AND DEPTH- 2.4 x 1 x 1.4 M is available to buy in increments of 1
Description
ATTENTION: This item is only delivered directly from the factory at an additional cost. Collection in Vichte is not possible. Please contact us for this.
MECH-MATE Motorpits are a heavy duty polyester resin moulding, laminated with 3 layers of 450 g/m² chopped strand glass matt. The tough resin gel-coated surface is colour (warm light grey) impregnated and easily cleaned with normal household liquid cleaners. The floor, side ledges and steps are further reinforced with 20mm laminated panels. The lighting and other recesses are also backed with the same material to facilitate fixing of units (customer supplied). Dovetail ribs are laminated to sides - providing stiffness and an additional locking mechanism between moulding and concrete backfill. The vacuum formed sliding seat and tool tray are moulded from 6mm High Density Polyethylene (HDP) - an extremely tough plastic. The mesh bugscreen rolls out under the timber boarded cover (not supplied) to prevent insects (can’t climb back up smooth sides) and debris entering the Motorpit. Non-slip tape for steps and hazard tape (open pit warning) further enhance the safety of a MECH-MATE Motorpit installation.
Characteristics:
• Reinforced glassfibre polyester construction providing a jointfree lining preventing water ingress.
• Easy to clean, wipe down surface.
• Built-in steps with non-slip surfaces
• Recessed facilities for lighting and power unit (customer supplied).
• Recessed facility for fire extinguisher/blanket (customer supplied).
• Full length facility for sliding seat.
• Full length storage ledges for sliding tooltray/drainage tank platform.
• Recess for timber boarded cover (customer supplied).
• Patterned slip resistant floor.
• Option sliding jacking platform or jacking beam.
• Designed for DIY installation even in wet ground.
• WITH EXTRA GEL FLOWCOAT.
• Extra deep @1.4 m (for persons > 1.88 m)
Comments: When using a running/working lamp in these Mech-Mate pits, the lamp must operate at a maximum voltage of 24 volts.
When lighting is installed (provided by the customer) in these Mech-Mate pits, this lighting must always be impact-resistant.
• Easy to clean, wipe down surface.
• Built-in steps with non-slip surfaces
• Recessed facilities for lighting and power unit (customer supplied).
• Recessed facility for fire extinguisher/blanket (customer supplied).
• Full length facility for sliding seat.
• Full length storage ledges for sliding tooltray/drainage tank platform.
• Recess for timber boarded cover (customer supplied).
• Patterned slip resistant floor.
• Option sliding jacking platform or jacking beam.
• Designed for DIY installation even in wet ground.
• WITH EXTRA GEL FLOWCOAT.
• Extra deep @1.4 m (for persons > 1.88 m)
Comments: When using a running/working lamp in these Mech-Mate pits, the lamp must operate at a maximum voltage of 24 volts.
When lighting is installed (provided by the customer) in these Mech-Mate pits, this lighting must always be impact-resistant.
